Department of Transportation-Tire quality grades: The U. The control is located on the outboard side of the seat cushion. Engine oil filler cap 5. If this happens, simply turn the headphones on again and continue use. Lift the head restraint so that it is located directly or as close as possible behind your head. Refer to Maintenance product specifications and capacities in this chapter.
High fluid levels can be caused by an overheating condition. Refer to Power mirrors in the Driver Controls chapter for more information. Remove the jumper cable from the ground metal surface. For questions or comments, contact HomeLink at www. Remove the jumper cable from the ground metal surface. Pull the lever towards you to deactivate. Press the power door unlock control on the door panel three times.
Refer to Maintenance product specifications and capacities in this chapter. Always inflate steel carcass tires with a remote air fill with the person inflating standing at a minimum of 12 ft. Load the desired disc, label side up. Heated seats if equipped The heated seat control is located on the climate control panel. See your authorized dealer for service. Pull the locking pin toward the center of the vehicle.
The foglamp indicator light will illuminate. Do not touch them after inflation. Install a new air filter element into the tray assembly. Turn off the engine and remove the key. Engine oil filler cap 5. The heated seats turn off when the ignition is turned off.
Check with your authorized dealer for availability. After the disabled vehicle has been started and the jumper cables removed, allow it to idle for several minutes so the engine computer can relearn its idle conditions. In addition, all seat belts should be checked for proper function. Turn off the engine, remove the fuel filler cap, align the cap properly and reinstall it. Refer to Transmission fluid temperature gauge in the Instrument Cluster chapter for the transmission fluid temperature information. Several air bag system components get hot after inflation. The heated seats automatically shut off after 10 minutes.
These quality products have been specifically engineered to fulfill your automotive needs; they are custom designed to complement the style and appearance of your vehicle. Operating the engine beyond the recommended speeds can cause severe engine damage. The air filter box needs to be free of any debris before installing a new air filter. Run the engine until it reaches normal operating temperature. Pull the old bulb out from the socket.
Information about vehicle modifications that increase horsepower, and torque output such as whether not performance-enhancing, powertrain components commonly referred performance, will stay in the system's memory even modification. Disposal of airbags and airbag equipped vehicles See your local authorized dealer. Always point the remote control directly at the player. Install the bulb socket in lamp assembly by turning it clockwise. Ford Motor Company recommends that all safety belt assemblies in use in vehicles involved in a collision be replaced.
Get access to our 2008 Ford F-250 Super Duty repair information right now, online. If equipped, use the tachometer and do not allow engine speed to exceed the redline area. Department of Transportation-Tire quality grades: The U. If the vehicle is equipped with a manual transmission, also depress the clutch pedal. This equipment has been tested and found to comply with the limits for a Class B digital device,. The sequence of the system check report and how it appears in the message center is as follows: 1. Slide the latch at the bottom of the handle, then lower the handle.
Check with your authorized dealer for availability. Locate and carefully remove the engine oil level indicator dipstick. The indicator light will turn off indicating the system is off. Remove the bulb socket from the foglamp by turning counterclockwise. Protect yourself from engine heat. Improper use of the power outlet can cause damage not covered by your warranty. This could take an hour or more.
The system will prompt you to load discs for the remaining available slots. This could take an hour or more. Fix it right the first time with the factory repair manual and save money by doing the job yourself. Visually inspect the tires to make sure there are no nails or other objects embedded that could poke a hole in the tire and cause an air leak. Be sure to put the cap back on the reservoir.